Are you trying to find printing sewing patterns. On this machine, there are a variety of blanket stitch-looking stitches. Take the time to stitch them out, find out which one you like the best, some will point to the right, some will point to the left, and some will have stitches in-between, some have a heavier look, so you just pick which one that you like. Right now, I’m going to show you stitch number 11. I’ve also made the stitches a little bit more spread apart by lengthening the stitch length to the same length that it is wide. You can adjust these. If it’s going to be two and a half millimeters wide, make the length two and a half millimeters long. Then you can go ahead and start there. I have also put on, taken off the J foot and put on the larger, I think this is the N foot, yes, and it has a little bit wider base to it. It also allows me to see in a little bit further. Of all the feet that come with this machine, that one has a little bit more viewing area.
First thing I’m going to do, is to start by seeing where that needle’s going to sink down. That’s going to be on the outside edge of the blanket stitch. I just want to see that that’s starting there and, keeping in mind that this also will stitch forward and back along that right side. I need to plan for that as I go around curves. I’m keeping the stitching that’s going up and back right next to the raw edge of the appliqué piece that I put on. Go ahead and fuse it on or spray baste it on; that will hold it in place. With the needle stopping down, that will help you pivot a little bit. We want to keep the bite that’s jumping into your appliqué area to stay nice and perpendicular. You might have to play around with this a little bit, get used to the way the order of the stitch is made, and then that way you can really control when to do your turning by giving it a little extra stitch at the right point.
I’m going to do a little turning there. The key is not to just twist the fabric, but actually pivot it at the right point. A little at a time is better than one big turn. That will help make for a nice smooth edge. I’m going to do just a little bit more and then I’ll take this out and show you how it looks here. cheap sewing machine How about one more? Perfect! We’ll see. This is what it’s looking like. As we go around the heart here. This is what you want. You want those stitches to be nice and hugged close to the right edge. See, every time I took a little tiny pivot, I ended up with a smoother stitch around the curve.
Working with zippers is easy when you put the zipper foot on. Notice it has two sides that we can attach on depending on what side of the zipper you’re stitching and which side he little teeth are on. To start off with, I always use a zipper much longer than my pattern calls for, that way I don’t have to be running up against the teeth or the stopper any time that I get close to it. First thing that I’m going to do is I’m going to attach it over here on the left side of the zipper foot. Now, we’re going to position this down so the foot, the toe is actually right next to the zipper. The zipper is right side down on my fabric, but the needle is way over here. We’re at the 0.00 stitch number, and now we’re going to move our needle a little bit closer to our foot. We can get it as close as we need it to be. Let’s just go ahead and stitch down this side.
I’m really just lining up my zipper with the edge of my fabric, and then the foot, with the teeth of the zipper. Next time a pattern, a bag pattern, has a zipper in it, don’t shy away, it’s really just a matter of putting it in. OK, now what we’re going to do is if we were going to top stitch this, we would take it to our iron and press this open, but now when we put the zipper down, we’re going to see that we need to be on the other side. best basic sewing machine We’re going to switch the zipper foot. We’re going to drop it off, switch it over to the right side, attach it in, set the zipper to be next to the teeth, and then once again, if we need to, actually I kind of like where my setting is right now, for the top stitching part, it was perfectly set, so I didn’t have to change it. Sometimes I do.
Now I am going to get a little wiggly here, I’m noticing, but the concept’s the same. Keep that going nice and straight, and then your zipper will be properly inserted. Just follow the directions on the pattern for perfectly inserted zippers.